HIGH
QUALITY MARINE GRADE
STAINLESS STEEL HARDWARE
This hardware is especially chosen to be compatible with each other and
the
ready made sails we offer. (This is not "cheap" home center
hardware seen
with other brands) Most of this hardware has "load ratings". These ratings
exceed the forces that our ready made sails generate.
Larger sizes of most products for use with custom sails etc. are available
by phone order.
Use
as Worksheet or Order On-Line (click on add to cart)
Stainless 1/4" Turnbuckle
Qty___X $26 ea = ____ 
Use on one or two corners to add final tension.
5 1/2"closed 8 1/2" open. (pin to pin)
High Quality Marine Stainless Steel. (Small, tidy and strong. From Denmark)
Breaking load is 2,860lbs!
Stainless 1/4" D Shackle Qty___X $9 ea
=_____
Use between sail ring and a horizontal eye to attach sail.
Forged 316 stainless steel. (Not cast) Breaking Strength 3,300
lbs.
Stainless 1/4" "Long D" Shackle
Qty___X $16 ea =_____
Adds a little more length over a standard "D"
shackle (shown above)
Forged 316 stainless steel. (Not cast) Breaking Strength 3,300
lbs.
3/16" Stainless Twist Shackle Qty___X
$16 ea = _____
Use when attaching sail to a vertical eye.
Forged 316 stainless (breaking strength 2,200 lbs)
Stainless Steel Delta Quick Link (1/4")
(we prefer to use "D" shackles)
Qty___X
$9.95 ea=____
EYE-BOLT stainless steel (3/8"X
6")
Qty
____ X $16 ea = _______
(3/8" by 6" long) 316 stainless steel
(metric equivelent may sometimes be substituted)
 
RAFTER-BOLT Stainless steel with
3/8"stainless eye nut
Qty
____ X $39 ea = _______
(3/8" threads)
Great way to attach to a rafter with a bolt extending through the fascia.
Lag or bolt through rafter with 5/16"- 3/8" lag screws or bolts.
(Not included)
We have these made for us
3/8" X 2.5" Stainless Steel BOLT for use with Rafter
Bolt for going through a 2X4 rafter
Qty
____ X $2.00 ea = _______
(3/8" threads)
nut and washer not included (see below)
Stainless Eye Nut 3/8"
Thread
Qty__X $12 ea =______
Use with a course thread Stainless bolt or with any length of threaded
rod.
An attractive strong eye
which is very versatile. 316 stainless steel alloy.
Threaded Rod
Stainless 3/8" X 2'
Qty__X $12.95 ea = ______
Use with an eye nut to through bolt through pipe, embed into masonry,
etc.
SET High Strength Epoxy
Qty__X $23.95 ea = ______
Use to embed threaded rod into concrete walls etc.
Epoxy-Tie SET epoxy is a two-component, low odor, 1:1 ratio, 100% solids
epoxy-based adhesive for use as a high strength, non-shrink anchor grouting material.
Stainless Strap Eye 2 3/4"
Qty__X $11.95 ea =______
Lag screw this to something
strong and you have an attractive loop
to attach to. Uses
2 each 5/16" Lag Screws or Bolts (not included).
316 stainless steel alloy.
2 Hole Pad-Eye 3.25"
Qty__X $11.95 ea =______
Lag screw this to
something strong and you have an stable loop
to attach to. Uses
2 each 5/16" Lag Screws or Bolts (not included).
316 stainless steel alloy.
Stainless Washer 3/8" ID
Qty__X $0.50 ea =_____
Stainless Hex Nut 3/8"
Qty__X $0.50 ea =_____
Stainless 3-Hole Plate
Qty__X $15 ea = _____
Ideal for small to moderate size sails attached to the corner of the house
or building.
Uses 2 each 5/16" Lag Bolts (not included). Brushed finish.
Attach sail to larger hole with twist shackle or turnbuckle.
Can be bent around a corner.
We have these made for us
Diamond Shaped Polished Stainless Pad Eye
Qty__X $21
ea = _____
Use four 5/16" lag screws or bolts (not included) into something
strong like a header.
(Best to mount horizontal) Attach sail with rope, shackle or turnbuckle.
Approximately 2.5" X 4" base plate
 Qty__X
$55 ea =______
Corner Bracket
is made of 1/8" thick stainless steel and is designed for the corner
of a
building. It has four holes for 5/16" bolts and comes with
an eye nut.
Provides for a connection at the
corner of the House.
Is generally adequate
for sails of our "Ready Made" sizes.
We have these made for us
Qty__X $40 ea =______
Long Bracket
Is made of 3/16" thick brushed stainless steel.
It has four holes for 5/16" bolts or lags and comes with an eye nut
as shown.
Gives the added security of 4
bolts for attaching to studs, or wherever?
Is generally adequate
for sails of our "Ready Made" sizes.
We have these made for us
Stainless Lag Screws 5/16"X3" Qty__X
$1.75 ea = ______
 3/16"
Stainless Steel Chain (1,150 lb W.L.L.)
Type 316 stainless steel. A rugged, highly corrosion resistant stainless.
(Add or subtract a link for rough adjustments. Use with turnbuckle for
final tensioning)
Stainless Steel Chain (Type 316) Feet___X
$5/ft = _____
1/8" stainless wire
(7 X 19 flexible)
Feet___X
$1/ft = _____
 EYE INSTALLED ON WIRE
END
Nicro press crimp and
thimble installed on 1/8" wire
Qty___X $8 ea = _____
(includes crimp & thimble)
 
Nicro Press Crimping Tool. For crimping sleeves onto wire.
3/16", 1/8", 3/32"& 1/16" wire.
Qty___X $49.95 ea =____
Nicro Press Sleeve for 1/8" wire rope
Qty____X
$1 ea =_____
(nickle/copper)
Stainless Steel Thimble
for 1/8" wire rope Qty___X
$2 ea = _____
Stainless Wire Clamp
For 1/8" Wire Qty___X
$7.95 ea =______
Dacron Rope
(not Nylon)(3/16"braided) Qty ft.___X .85/ft = _____
Ideal for tying on ready made sails.
Low stretch and strong
(1,200 lbs breaking strength)
Qty__X
$130 ea =______
Heavy Duty Corner Bracket is made of 3/16" thick stainless
steel and is designed for the corner of a
building. It has four holes for 3/8" bolts and
comes with an eye nut.
Is generally used for higher
load applications
 Qty__X
$15 ea =______
Gavanized Post Cap
Fits on top of standard 4" schedule 40 pipe.
We have these made for us
 
Qty__X $60 ea =______
Copper Post Cap
Fits on top of standard 4" schedule 40 pipe.
We have these made for us
They will corrode to a copper/green patina
Other fasteners available. Please call. Qty__X $___ ea =_________
SUBTOTAL ___________
In California there will be an additional
8.25% CA sales tax
_____________
All Orders Must Include
a Shipping & Handling Charge
_____________
Shipping and handling (US only)
Purchase Amt. Shipping
Cost
$0.01 - 49.99 $4.95
$50.00 - 99.99 $16.95
$100.00 - 199.99
$21.95
$200.00 - 299.99
$26.95
$300.00 and over $31.95
On-line orders have shipping and applicable sales tax
automatically added at end of check out.
Expedited shipping info click here: Shipping
TOTAL___________
Shade Sails LLC
7028 Greenleaf Ave.
Suite K
Whittier, CA 90602
USA
E mail donc@shadesails.com
Order
online  
Credit Cards orders are accepted (via Pay-Pal) and shipments made ASAP.
Simply click on related product link.
Privacy and security are assured by Pay Pal's systems.
Or send check or money order to:
Shade Sails LLC
7028 Greenleaf Ave.
Suite K
Whittier, CA 90602
|
